Compatible with 1275cc/1300cc carburetor/injection vehicles from 1990 to 2001.
190mm clutch plate
Figure reference numbers 2, 9, 14, and 11 (partial)
Reference Part Number
GCK152
GCK152MS
XN12A 1300cc Injection/Carburetor Clutch 3-Piece Kit
Mini Spares
MINI VERTO CLUTCH KIT FOR INJECTION MODELS
Non Genuine 3 piece Injection Clutch with the larger 190mm wide for 1990 on and all injection cars, but it can be used on earlier non injection Verto type engines only if the flywheel is 100% PERFECT WITHOUT WEAR. Check nothing fouls when bolting up in case of mismatches. Buy the best as we have tried the rest.
Non injection cars do not need the clutch trigger alignment correct to work but Injection cars do require the correct assembly. Use your original centre boss to ensure correct pick up point positions. The centre boss is available as DAM5921.
Clutch kits should be re-balanced to the flywheel assembly as originally done on production. This is because the verto pressure was a heavier item and the main mass rather than the flywheel as on earlier diaphragm models. This was recognised as a small design fault but easily overcome by balancing which is why Rover originally supplied complete balanced Verto assemblies as repacement parts.
Do not forget to change the AAU2866 seal for the clutch release bearing to plunger.
